Multi-Cell IP DECT Systems | Comms Warehouse

IP Multi-Cell DECT Systems for Larger Sites

A multi-cell IP DECT system links several DECT base stations over your network, so cordless handsets keep their call as you move from one coverage area to the next. This handover lets one system cover a large office, warehouse, school or multi-floor building.

This page lists new multi-cell IP DECT products from Yealink, Gigaset and Snom: the Yealink W80DM DECT manager, the Gigaset N870 IP PRO base station and N720 IP PRO site planning kit, and the Snom M5 repeater for the Snom M700. For a small site that one base can cover, see IP Single-Cell DECT Solutions.

Showing all 5 resultsSorted by popularity

How to plan a multi-cell IP DECT system

Survey the site first

Walls, floors, racking and metal all reduce DECT range. A site survey shows where each base should go before you fit anything. The Gigaset N720 IP PRO site planning kit is made for this job.

Manager and base stations

A multi-cell IP DECT system needs a DECT manager to control the bases and the handover. The Yealink W80DM is a dedicated manager for Yealink W80B bases. The Gigaset N870 IP PRO is a base station that can also act as the manager in smaller systems.

Repeaters for hard-to-reach spots

A repeater extends coverage where running a network cable to a new base is difficult. The Snom M5 repeater works with the Snom M700 base. Repeaters add coverage, and extra bases add both coverage and call capacity.

Network and power

Multi-cell bases connect to your network, and most take power over Ethernet (PoE). The bases must stay in sync with each other, so plan switch ports, VLANs and cabling with your network team. Each handset registers to your phone system as a SIP extension.

Multi-cell IP DECT products in this range

ProductRole in the system
Yealink W80DMDECT manager that controls Yealink W80B base stations
Gigaset N870 IP PROMulti-cell base station that can also act as the DECT manager
Gigaset N720 IP PRO site planning kitSurvey kit to plan base positions before installation
Snom M5DECT repeater for the Snom M700 base

Questions

What is the difference between single-cell and multi-cell DECT?

A single-cell system uses one base, and a multi-cell system links several bases with handover between them. Single-cell suits small sites with a handful of users. Multi-cell suits large or multi-floor sites where people move around during calls. See IP Single-Cell DECT Solutions for one-base systems.

Do I need a site survey for multi-cell DECT?

Yes, a survey is the safest way to plan a multi-cell IP DECT system. It shows how far the signal really reaches through your walls and floors, so you fit enough bases in the right places. The Gigaset N720 IP PRO site planning kit on this page is made for that survey.

Can I use my existing DECT handsets on a multi-cell system?

Often yes, if they are from the same maker. Yealink lists handsets such as the W56H and W53H as compatible with its W80 multi-cell system. Handsets from another brand may only work with basic calling, so check the maker's compatibility list first.

Does multi-cell IP DECT work with 3CX or hosted VoIP?

Usually yes, because each handset registers as a SIP extension. The DECT manager connects to your phone system over the network, and handsets keep the same extension as they move between bases. Check your provider's list of supported devices, or ask us.

Need a model that is not listed?

Send us the model numbers and quantities you need. We will reply with what we can supply.

Request a quote